Exit Point Methods Basic Sort & Search screen
How to Get There
On the Work with Product Exits Menu,select option 2, then press F14.
What it Does
The Sort and Search Exit Point Methods feature is used to select and order Authority Broker Exit Point Method entries. Several options are available to assist in reducing the amount of information you must view.
The first of these options is the ability to search exit point methods. Searching is performed by making selections in the "Search Criteria" section.
Second is the use of SQL syntax. For example, wild card character % may be placed at any position within any selection.
Lastly you may select the sort order you wish entries to be in. This is accomplished by entering a 1 through 3 next to the items in the "Select Sequence" section.
Options
Select the sorting sequence
The Sort by section provides the capability to order your search. Possible values are 1 through 3 where 1 is highest and 3 is lowest. If left blank the value is not used when sorting search results.
Exit Point method: Enter a value of 1 through 3 to specify the sort sequence you wish for Exit Point Method. If left blank, it is not used when sorting search results.
Program Name: Enter a value of 1 through 3 to specify the sort sequence you wish for Program Name. If left blank, it is not used when sorting search results.
Library Name: Enter a value of 1 through 3 to specify the sort sequence you wish for Library name. If left blank, it is not used when sorting search results.
Select your search criteria
The Search Criteria section provides the capability to select which exit point methods are to be listed. Supplied values are exit point method, program name, Iibrary name, and exit point method type.
Exit point method, program name, and library name may have any SQL syntax for a SELECT clause you require. For example an exit point method entry of %IS% will list only exit point methods with IS in them.
Exit Point method:Select the Exit Point Method you wish to see. Leave Exit Point Method blank if you wish to see all exit point methods. SQL syntax is supported for Exit Point Methods.
Program Name:Select the Program name you wish to see Exit Point Methods for. Leave Program name blank if you wish to see all objects. SQL syntax is supported for Program name.
Library Name: Select the Library name you wish to see Exit Point Methods for. Leave Library name blank to see all libraries. SQL syntax is supported for Library name.
Exit Point Method Types
Exit point methods may be used at four points. These points allow Authority Broker to be extended. Each exit point designates where its method will execute.
Before profile switch: The Before profile switch exit point is to be used for additional verification. It executes before a profile switch actually occurs.
After profile switch: The After profile switch exit point is used after a profile switch has occurred. It is intended to allow environment specific functions to be performed before processing control is released by profile switch command LSWPPRF.
Before profile release: The Before profile release exit point is used before a profile switch is released. It is intended to allow environment specific functions to be performed before processing control is released by profile release command LRLSPRF.
After profile release: After profile release exit point is used after the profile switch is released. It is intended to allow environment specific functions to be performed after processing control is released by profile release command LRLSPRF.
Command Keys
F3 (Exit): Exit the program without processing any pending changes.
F5 (Refresh): Refresh the screen.
F11 (Advanced Search): Use more advanced search capabilities. See Exit Point Methods Advanced Sort & Search.
F12 (Cancel): Exit the screen without processing any pending changes.
Advanced Search (F11) presents a screen (shown below) that allows more advanced selection for data sorting and searching criteria. SQL WHERE clause syntax is used to enter the criteria use in the search for Alert method, Object name, or Library name.
About the Before Switch Exit Point
Before Switch exit point is used to perform additional verifications before a profile switch actually occurs. This exit point is utilized after Authority Broker’s switch verification but before the profile switch actually occurs. It is invoked for global and switch pair specific entries. This exit point may be used, for example, when a company requires call ticket be verified against their Help desk database.
The Before Switch exit point has the following functionality:
- Maximum of 50 global exit programs.
- Maximum of 50 switch pair specific exit programs.
- Global exit programs are processed first.
Each exit program is capable of the following actions:
- Allowing the switch to occur. If an exit program allows the switch to occur the next exit program in the sequence will be executed. Specific switch pair exit programs for this exit point will then be processed.
- Rejecting the switch. If an exit program rejects the switch all exit program processing is ended and the attempted switch is stopped. Specific switch pair exit programs for this exit point will not be processed.
- Allowing the switch to occur and bypass further global exit program processing. If an exit program allows the switch to occur but requests further processing of global exit program processing be halted the switch is allowed. The specific switch-pair exit programs for this exit point will then be processed.
The return code values are:
- 0 = Allowed (by this exit program, continue with the next exit program).
- 1 = REJECT
- 2 = ALLOWED, and don’t check any more exit programs.
Required Parameter Group
| Parameter | How Used | Data Type | Sequence | Notes | Parameter |
|---|---|---|---|---|---|
| Exit point name | Input | CHAR(20) | 1 | The name of the exit point being executed. This will always be PTG_AB_BEFORESWITCH for the before switch exit point. |
Exit point name |
| Exit point format name | Input | CHAR(10) | 2 | The format name of the exit point being executed. ABV0100 = Global PTG_AB_ BEFORESWITCH exit point. ABV0200 = Switch pair specific PTG_AB_ BEFORESWITCH exit point. |
Exit point format name |
| System user | Input | CHAR(10) | 3 | The name of the user profile that switched to the application/resource ID. | System user |
| Application/Resource ID | Input | CHAR(10) | 4 | The name of the user profile the system user is switching to. | Application/Resource ID |
| Timed switch command | Input/Output | CHAR(128) | 5 | The command to be run when a timed switch is being performed. Only valid for switches having a specific number of minutes to remain switched. If a value is returned, the command is executed once the profile switch has occurred. |
Timed switch command |
Optional Parameter Group 1
| Parameter | How Used | Data Type | Sequence | Notes | Parameter |
|---|---|---|---|---|---|
| Client IP address | Input | CHAR(15) | 6 | The client IP address returned from IBM’s QUSRJOBI API in format JOBI0600. | Client IP address |
| System name | Input | CHAR(8) | 7 | The name of the system the profile switch took place on. This is the same name as shows in the “Current system name” parameter of IBM command DSPNETA. | System name |
| Job environment type | Input | CHAR(1) | 8 | The job’s environment type. 0 – A value - lf “0” indicates the job that performed the profile switch was running in batch mode. 1 – A value - lf “1” indicates the job that performed the profile switch was running in interactive mode. |
Job environment type |
| FireCall switch | Input | CHAR(1) | 9 | Specifies if the profile switch was for a FireCall. Y = FireCall switch N = Not a FireCall switch. |
FireCall switch |
| Switch amount of time | Input | CHAR(6) | 10 | The number of minutes the switch is allowed to operate. | Switch amount of time |
| Call ticket number | Input | CHAR(20) | 11 | The number of minutes the switch is allowed to operate. | Call ticket number |
| Notification data | Input | CHAR(276) | 12 | The formatted data used when writing the switch audit journal entry. Format is for Authority Broker message PID8001. System user requested authority of Application/Resource ID for reason entered for the profile switch. |
Notification data |
| Interested Party list | Input | Array of CHAR(10) | 13 | A list of parties interested in the profile switch. A maximum of 100 interested parties will be supplied. | Interested Party list |
| Number of array elements | Input | INT(10,0) | 14 | The number of entries in the Interested Party list. | Number of array elements |
Optional Parameter Group 2
| Parameter | How Used | Data Type | Sequence | Notes |
|---|---|---|---|---|
| Return code | Output | INT(10,0) | 15 | The code telling the exit point what action is to be taken. There are three possible values. Any other values will cause this parameter to default to 0. |
About the After Switch Exit Point
Required Parameter Group
| Parameter | How Used | Data Type | Sequence | Notes |
|---|---|---|---|---|
| Exit point name | Input | CHAR(20) | 1 | The name of the exit point being executed. PTG_AB_AFTERSWITCH is the exit point name. |
| Exit point format name | Input | CHAR(10) | 2 | The format name of the exit point being executed. ABAS0100 = Global After switch. ABAS0200 = Switch pair specific After switch. |
| System user | Input | CHAR(10) | 3 | The name of the user profile that switched to the application/resource ID. |
| Application/Resource ID | Input | CHAR(10) | 4 | The name of the user profile the system user switched to. |
| Timed switch command | Input/Output | CHAR(128) | 5 | The command to be run when a timed switch is being performed. Only valid for switches having a specific number of minutes to remain switched. If a value is returned, the command is executed once the profile switch has occurred. |
Optional Parameter Group
| Parameter | How Used | Data Type | Sequence | Notes |
|---|---|---|---|---|
| Client IP address | Input | CHAR(15) | 6 | The client IP address returned from IBM’s QUSRJOBI API in format JOBI0600. |
| System name | Input | CHAR(8) | 7 | The name of the system the profile switch took place on. This is the same name as shows in the “Current system name” parameter of IBM command DSPNETA. |
| Job environment type | Input | CHAR(1) | 8 | The job’s environment type. 0 – A value - lf “0” indicates the job that performed the profile switch was running in batch mode. 1 – A value - lf “1” indicates the job that performed the profile switch was running in interactive mode. |
| FireCall switch | Input | CHAR(1) | 9 | Specifies if the profile switch was for a FireCall. Y = FireCall switch N = Not a FireCall switch. |
| Switch amount of time | Input | CHAR(6) | 10 | The number of minutes the switch is allowed to operate. |
| Call ticket number | Input | CHAR(20) | 11 | The number of minutes the switch is allowed to operate. |
| Notification data | Input | CHAR(276) | 12 | The formatted data used when writing the switch audit journal entry. Format is for Authority Broker message PID8001. System user requested authority of Application/Resource ID for reason entered for the profile switch. |
| Interested Party list | Input | Array of CHAR(10) | 13 | A list of parties interested in the profile switch. A maximum of 100 interested parties will be supplied. |
| Number of array elements | Input | INT(10,0) | 14 | The number of entries in the Interested Party list. |
| Reserved | Input | INT(10,0) | 15 | This parameter is reserved for Powertech's use. |