System Requirements
Before You Install
Read this information completely before you install HelpSystems Insite on your Windows, PowerLinux or Linux servers.
-
If there are any firewalls between your PC and the server, verify that your profile has access to the PC.
-
Your network must be configured and working using TCP/IP configuration.
-
HelpSystems Insite supports GNU Tar. Be sure you're using that version of tar.
-
Installation on an Active Directory server is not supported.
The following products are compatible with HelpSystems Insite:
-
Powertech Multi-Factor Authentication 1.0 or higher
- Authority Broker 4.18 or higher
- Automate BPA Server 10.5 or higher
- Automate Schedule 4.3 or higher
-
Powertech Encryption for IBM i 3.5.8 or higher
- GoAnywhere MFT 5.7.0 or higher
- Iniste Analytics 1.0 or higher
-
Intermapper 6.3 or higher
- Powertech Password Self Help 3.001 or higher
- Powertech Antivirus 5.0 or higher
- Powertech Event Manager 6.1 or higher
-
Powertech Exit Point Manager for IBM i R7M04 or higher
- Robot Network R11M00 or higher
- Robot Schedule R10M30 or higher
-
Vityl IT & Business Monitoring 1.0 or higher
Note: IBM i systems that will be connecting to your Insite Server must be at V7R2 or higher.
System Requirements
See the System Requirements page on the Helpsystems Community Portal.